testthat::test_that("Dates", { start1 <- lubridate::now() end1 <- start1 + lubridate::ddays(10) start2 <- lubridate::as_date(start1) end2 <- lubridate::as_date(end1) # Dates testthat::expect_length(time_seq(start2, end2, time_by = "day"), 11) testthat::expect_equal(time_seq(start2, end2, length.out = 11), # Result is datetime lubridate::as_datetime(seq(start2, by = "day", length.out = 11))) # testthat::expect_error(time_seq(start2, end2, length.out = 22, time_type = "period")) # testthat::expect_error(time_seq(start2, end2, length.out = 10, # time_type = "period")) testthat::expect_equal(time_seq(start2, end2, time_by = "day"), seq(start2, end2, by = "day")) testthat::expect_equal(time_seq(start2, end2, length.out = 10, time_type = "duration"), seq(lubridate::as_datetime(start2), lubridate::as_datetime(end2), length.out = 10)) # Test for month arithmetic when to is at the end of a month # This may be unexpected but at the moment, emphasis is always placed on a start point of any seq testthat::expect_equal(time_seq(to = lubridate::ymd("1946-01-31"), length.out = 2, time_by = "9 months"), lubridate::ymd(c("1945-04-30", "1946-01-30"))) # Very basic tests ### DATES ### testthat::expect_equal(time_seq(lubridate::Date(0), start2, time_by = "day", time_type = "duration"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq(lubridate::Date(0), start2, time_by = "day", time_type = "period"), lubridate::Date(0)) testthat::expect_equal(time_seq(lubridate::POSIXct(0), start2, time_by = "day", time_type = "period"), lubridate::POSIXct(0)) testthat::expect_error(suppressWarnings(time_seq(start2, lubridate::Date(0), time_by = "day", time_type = "duration"))) testthat::expect_error(suppressWarnings(time_seq(start2, lubridate::Date(0), time_by = "day", time_type = "period"))) testthat::expect_error(suppressWarnings(time_seq(start2, lubridate::POSIXct(0), time_by = "day", time_type = "period"))) testthat::expect_equal(time_seq(start2, end2, time_by = "day"), seq(start2, end2, by = "day")) testthat::expect_equal(time_seq(start2, end2, time_by = "3 days"), seq(start2, end2, by = "3 days")) testthat::expect_equal(time_seq(start2, end2, time_by = "hour"), seq(time_cast(start2, lubridate::origin), time_cast(end2, lubridate::origin), by = "hour")) testthat::expect_equal(time_seq(start2, end2, time_by = "min"), seq(time_cast(start2, lubridate::origin), time_cast(end2, lubridate::origin), by = "min")) testthat::expect_equal(time_seq(start2, time_by = "day", length.out = 3), seq(start2, by = "day", length.out = 3)) # Extreme cases testthat::expect_equal(time_seq(start2, time_by = "day", length.out = 0), lubridate::Date(0)) testthat::expect_equal(time_seq(start2, time_by = "day", length.out = 1), start2) testthat::expect_equal(time_seq(start2, time_by = "day", length.out = 0, time_type = "duration"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq(start2, time_by = "day", length.out = 1, time_type = "duration"), time_cast(start2, lubridate::origin)) # testthat::expect_equal(time_seq(start2, time_by = "day", length.out = 1, # time_type = "duration", # tz = "Europe/London"), # lubridate::with_tz(start2, tzone = "Europe/London")) # When by isn't specified, the output may be POSIX even if from and to are dates testthat::expect_equal(time_seq(start2, end2, length.out = 0), lubridate::POSIXct(0)) testthat::expect_equal(time_seq(start2, end2, length.out = 0, time_type = "period"), lubridate::Date(0)) testthat::expect_equal(time_seq(start2, end2, length.out = 1), time_cast(start2, lubridate::origin)) testthat::expect_equal(time_seq(start2, end2, length.out = 0, time_type = "duration"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq(start2, end2, length.out = 1, time_type = "duration"), time_cast(start2, lubridate::origin)) # Special case where by calculates to 0 seconds, and so the output is a datetime. # This is likely a feature that will change in the timechange package testthat::expect_equal(time_seq(start2, start2, length.out = 3, time_type = "period"), rep_len(lubridate::as_datetime(start2), 3)) testthat::expect_equal(time_seq(start2, start2, length.out = 3, time_type = "duration"), rep_len(lubridate::as_datetime(start2), 3)) testthat::expect_equal(time_seq(end2, end2, length.out = 3, time_type = "duration"), rep_len(lubridate::as_datetime(end2), 3)) testthat::expect_equal(time_seq(start2, start2, time_type = "period", time_by = list("days" = 1)), start2) testthat::expect_equal(time_seq(start2, start2, time_type = "duration", time_by = list("days" = 1)), lubridate::as_datetime(start2)) # Warning when 4 arguments supplied testthat::expect_warning(time_seq(start2, start2, length.out = 10, time_by = "days", time_type = "period")) testthat::expect_warning(time_seq(start2, start2, length.out = 10, time_by = "days", time_type = "duration")) # Error with too few arguments testthat::expect_error(time_seq(start2, time_by = "day")) testthat::expect_error(time_seq(to = end2, time_by = "day")) testthat::expect_error(time_seq(start2, time_by = "day")) testthat::expect_error(time_seq(start2, length.out = 5)) testthat::expect_error(time_seq(to = start2, length.out = 5)) # Error, cannot supply time_by = 0 testthat::expect_error(time_seq(start2, end2, time_type = "period", time_by = list("days" = 0))) testthat::expect_error(time_seq(start2, end2, time_type = "duration", time_by = list("days" = 0))) # testthat::expect_error(time_seq(start2, start2, time_type = "period", time_by = list("days" = 0))) # testthat::expect_error(time_seq(start2, start2, time_type = "duration", time_by = list("days" = 0))) # from > to examples # Wrong result with wrong by sign, will upgrade this to error in the future # testthat::expect_error(time_seq(end2, start2, time_by = list("days" = -1))) testthat::expect_equal(time_seq(end2, start2, length.out = 11, time_type = "duration"), seq.POSIXt(lubridate::as_datetime(end2), lubridate::as_datetime(start2), length.out = 11)) testthat::expect_equal(time_seq(end2, start2, length.out = 11, time_type = "period"), seq(end2, start2, length.out = 11)) testthat::expect_equal(time_seq(end2, start2, time_by = list("days" = -1), time_type = "duration"), seq.POSIXt(lubridate::as_datetime(end2), lubridate::as_datetime(start2), by = -86400)) testthat::expect_equal(time_seq(end2, start2, time_by = list("days" = -1), time_type = "period"), seq(end2, start2, by = -1)) }) testthat::test_that("Datetimes", { start1 <- lubridate::ymd_hms("2023-03-16 11:43:48", tz = "Europe/London") end1 <- start1 + lubridate::ddays(10) start2 <- lubridate::as_date(start1) end2 <- lubridate::as_date(end1) testthat::expect_equal(time_seq(3, 100, time_by = 12.5), seq(3, 100, by = 12.5)) testthat::expect_equal(time_seq(3, length.out = 100, time_by = 2.5), seq(3, length.out = 100, by = 2.5)) testthat::expect_equal(time_seq(start1, end2, time_by = "day", time_type = "duration"), seq(start1, time_cast(end2, start1), by = "day")) testthat::expect_equal(time_seq(16, 107, time_by = 7, time_floor = TRUE), seq(time_floor(16, time_by = 7), 107, by = 7)) testthat::expect_equal(time_seq(start1, start1 + lubridate::years(1), time_by = "3 weeks", time_type = "duration", week_start = 1, time_floor = TRUE), seq(lubridate::floor_date(start1, unit = "week", week_start = 1), start1 + lubridate::years(1), by = "3 weeks")) testthat::expect_equal(time_seq(start1, time_by = "week", length.out = 54, week_start = 1, time_floor = TRUE, time_type = "duration"), seq(lubridate::floor_date(start1, unit = "week", week_start = 1), length.out = 54, by = "week")) testthat::expect_equal(time_seq(to = max(seq(start1, length.out = 54, by = "week")), time_by = "week", length.out = 54, week_start = 1, time_floor = TRUE, time_type = "duration"), seq(lubridate::floor_date(start1, unit = "week", week_start = 1), length.out = 54, by = "week")) testthat::expect_warning(time_seq(start1, end1, length.out = 54, week_start = 1, time_floor = TRUE, time_type = "duration")) testthat::expect_equal(time_seq(end1, length.out = 10, time_by = "day", time_type = "duration"), seq(end1, length.out = 10, by = "day")) testthat::expect_equal(time_seq(to = end1, length.out = 10, time_by = "day", time_type = "duration"), seq(end1 - lubridate::ddays(9), to = end1, by = "day")) testthat::expect_equal(time_seq(start2, end1, time_by = "day", time_type = "duration"), seq(lubridate::as_datetime(start2, tz = lubridate::tz(end1)), end1, by = "day")) testthat::expect_length(time_seq(start1, end1, time_by = "day"), 11) testthat::expect_equal(time_seq(start1, end1, length.out = 11), # Result is datetime lubridate::as_datetime(seq(start1, by = "day", length.out = 11))) testthat::expect_equal(time_seq(start1, end1, length.out = 22, time_type = "duration"), seq(start1, end1, length.out = 22)) testthat::expect_equal(time_seq(end1, start1, length.out = 22, time_type = "duration"), seq(end1, start1, length.out = 22)) testthat::expect_true(length(setdiff(time_seq(start1, end1, length.out = 33, time_type = "period"), time_seq(start1, end1, length.out = 33, time_type = "duration"))) == 32) testthat::expect_equal(time_seq(start1, end1, time_by = "day", time_type = "duration"), seq(start1, end1, by = "day")) testthat::expect_equal(time_seq(start1, end1, length.out = 10, time_type = "duration"), seq(lubridate::as_datetime(start1), lubridate::as_datetime(end1), length.out = 10)) # Very basic tests ### DATETIMES ### testthat::expect_error(time_seq(start1, lubridate::POSIXct(0), time_by = "day")) testthat::expect_equal(time_seq(start1, end1, time_by = "day", time_type = "duration"), seq(start1, end1, by = "day")) testthat::expect_equal(time_seq(start1, end1, time_by = "3 days", time_type = "duration"), seq(start1, end1, by = "3 days")) testthat::expect_equal(time_seq(start1, end1, time_by = "hour"), seq(start1, end1, by = "hour")) testthat::expect_equal(time_seq(start1, end1, time_by = "min"), seq(start1, end1, by = "min")) testthat::expect_equal(time_seq(start1, time_by = "day", length.out = 3, time_type = "duration"), seq(start1, by = "day", length.out = 3)) # Extreme cases testthat::expect_equal(time_seq(start1, time_by = "day", length.out = 0, time_type = "duration"), lubridate::with_tz(lubridate::POSIXct(0), tz = "Europe/London")) testthat::expect_equal(time_seq(start1, time_by = "day", length.out = 1, time_type = "duration"), start1) testthat::expect_equal(time_seq(start1, time_by = "day", length.out = 0, time_type = "duration"), lubridate::with_tz(lubridate::POSIXct(0), tz = "Europe/London")) testthat::expect_equal(time_seq(start1, time_by = "day", length.out = 1, time_type = "duration"), start1) # testthat::expect_equal(time_seq(start1, time_by = "day", length.out = 1, # time_type = "duration", # tz = "UTC"), # lubridate::with_tz(start1, tzone = "UTC")) # When by isn't specified, the output may be POSIX even if from and to are dates testthat::expect_equal(time_seq(start1, end1, length.out = 0), lubridate::with_tz(lubridate::POSIXct(0), tz = "Europe/London")) testthat::expect_equal(time_seq(start1, end1, length.out = 0, time_type = "period"), lubridate::with_tz(lubridate::POSIXct(0), tz = "Europe/London")) testthat::expect_equal(time_seq(start1, end1, length.out = 1), start1) testthat::expect_equal(time_seq(start1, end1, length.out = 0, time_type = "duration"), lubridate::with_tz(lubridate::POSIXct(0), tz = "Europe/London")) testthat::expect_equal(time_seq(start1, end1, length.out = 1, time_type = "duration"), start1) # Special case where by calculates to 0 seconds, and so the output is a datetime. # This is likely a feature that will change in the timechange package testthat::expect_equal(time_seq(start1, start1, length.out = 3, time_type = "period"), rep_len(start1, 3)) testthat::expect_equal(time_seq(start1, start1, length.out = 3, time_type = "duration"), rep_len(start1, 3)) testthat::expect_equal(time_seq(end1, end1, length.out = 3, time_type = "duration"), rep_len(end1, 3)) testthat::expect_equal(time_seq(start1, start1, time_type = "period", time_by = list("days" = 1)), start1) testthat::expect_equal(time_seq(start1, start1, time_type = "duration", time_by = list("days" = 1)), start1) # Warning when 4 arguments supplied testthat::expect_warning(time_seq(start1, start1, length.out = 10, time_by = "days", time_type = "period")) testthat::expect_warning(time_seq(start1, start1, length.out = 10, time_by = "days", time_type = "duration")) # Error with too few arguments testthat::expect_error(time_seq(start1, time_by = "day")) testthat::expect_error(time_seq(to = end1, time_by = "day")) testthat::expect_error(time_seq(start1, time_by = "day")) testthat::expect_error(time_seq(start1, length.out = 5)) testthat::expect_error(time_seq(to = start1, length.out = 5)) # Error, cannot supply time_by = 0 testthat::expect_error(time_seq(end1, start1, time_type = "period", time_by = list("days" = 0))) testthat::expect_error(time_seq(end1, start1, time_type = "duration", time_by = list("days" = 0))) # testthat::expect_error(time_seq(start1, start1, time_type = "period", time_by = list("days" = 0))) # testthat::expect_error(time_seq(start1, start1, time_type = "duration", time_by = list("days" = 0))) # from > to examples # Wrong result with wrong by sign, will upgrade this to error in the future # testthat::expect_error(time_seq(end1, start1, time_by = list("days" = -1))) testthat::expect_equal(time_seq(end1, start1, length.out = 11, time_type = "duration"), seq.POSIXt(end1, start1, length.out = 11)) testthat::expect_equal(time_seq(end1, start1, length.out = 11, time_type = "duration"), seq(end1, start1, length.out = 11)) testthat::expect_equal(time_seq(end1, start1, time_by = list("days" = -1), time_type = "duration"), seq.POSIXt(end1, start1, by = -86400)) testthat::expect_equal(time_seq(end1, start1, time_by = list("days" = -1), time_type = "duration"), seq(end1, start1, by = -86400)) # Testing the vectorized period and duration sequence functions y1 <- period_seq_v(lubridate::today(), lubridate::today() + lubridate::days(50), "days", c(2, rep(1, 112), rep(2, 154), 3, 6, 9)) # y2 <- period_seq_v2(lubridate::today(), lubridate::today() + lubridate::days(50), # "days", c(2, rep(1, 112), rep(2, 154), 3, 6, 9)) # y3 <- period_seq_v3(lubridate::today(), lubridate::today() + lubridate::days(50), # "days", c(2, rep(1, 112), rep(2, 154), 3, 6, 9)) y4 <- lubridate::as_date(duration_seq_v(lubridate::today(), lubridate::today() + lubridate::days(50), "days", c(2, rep(1, 112), rep(2, 154), 3, 6, 9))) # testthat::expect_equal(y1, y2) # testthat::expect_equal(y1, y3) testthat::expect_equal(y1, y4) # testthat::expect_equal(y2, y4) # testthat::expect_equal(y2, y3) # testthat::expect_equal(y3, y4) testthat::expect_equal(time_seq_v(1, c(50, 100, 100), time_by = 2:4), c(seq(1, 50, by = 2), seq(1, 100, by = 3), seq(1, 100, by = 4))) }) testthat::test_that("Time sequence lengths", { start1 <- lubridate::ymd_hms("2023-03-16 11:43:48", tz = "Europe/London") end1 <- start1 + lubridate::ddays(37) end2 <- start1 + lubridate::days(37) testthat::expect_equal(time_seq_sizes(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "period"), integer(0)) testthat::expect_equal(time_seq_sizes(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "duration"), integer(0)) testthat::expect_equal(time_seq_sizes(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "period"), integer(0)) testthat::expect_equal(time_seq_sizes(lubridate::POSIXct(0), lubridate::Date(0), time_by = "days", time_type = "duration"), integer(0)) testthat::expect_equal(time_seq_sizes(lubridate::POSIXct(0), lubridate::Date(0), time_by = "days", time_type = "period"), integer(0)) testthat::expect_equal(time_seq_sizes(lubridate::POSIXct(0), lubridate::POSIXct(0), time_by = "days", time_type = "duration"), integer(0)) testthat::expect_equal(time_seq_sizes(lubridate::POSIXct(0), lubridate::POSIXct(0), time_by = "days", time_type = "period"), integer(0)) testthat::expect_true(identical(time_seq_sizes(start1, end2, time_by = "days", time_type = "period"), 38L)) testthat::expect_equal(time_seq_sizes(start1, lubridate::POSIXct(0), time_by = "days", time_type = "period"), integer(0)) testthat::expect_equal(time_seq_sizes(start1, lubridate::Date(0), time_by = "days", time_type = "period"), integer(0)) testthat::expect_true(identical(time_seq_sizes(start1, end2, time_by = "days", time_type = "duration"), 37L)) }) testthat::test_that("Vectorised time sequences", { start1 <- lubridate::ymd_hms("2023-03-16 11:43:48", tz = "Europe/London") end1 <- start1 + lubridate::ddays(37) end2 <- start1 + lubridate::days(37) testthat::expect_equal(time_seq_v(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "period"), lubridate::Date(0)) testthat::expect_equal(time_seq_v(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "duration"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq_v(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "period"), lubridate::Date(0)) testthat::expect_equal(time_seq_v(lubridate::POSIXct(0), lubridate::Date(0), time_by = "days", time_type = "duration"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq_v(lubridate::POSIXct(0), lubridate::Date(0), time_by = "days", time_type = "period"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq_v(lubridate::POSIXct(0), lubridate::POSIXct(0), time_by = "days", time_type = "duration"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq_v(lubridate::POSIXct(0), lubridate::POSIXct(0), time_by = "days", time_type = "period"), lubridate::POSIXct(0)) testthat::expect_equal(time_seq_v(start1, end2, time_by = "days", time_type = "period"), time_seq(start1, end2, time_by = "days", time_type = "period")) testthat::expect_equal(time_seq_v(start1, end2, time_by = "days", time_type = "duration"), time_seq(start1, end2, time_by = "days", time_type = "duration")) testthat::expect_equal(time_seq_v(start1, lubridate::POSIXct(0), time_by = "days", time_type = "period"), lubridate::with_tz(lubridate::POSIXct(0), tzone = "Europe/London")) testthat::expect_equal(time_seq_v(start1, lubridate::Date(0), time_by = "days", time_type = "period"), lubridate::with_tz(lubridate::POSIXct(0), tzone = "Europe/London")) testthat::expect_equal(time_seq_v(lubridate::as_date(start1), lubridate::Date(0), time_by = "days", time_type = "period"), lubridate::Date(0)) foo1 <- function(x) time_seq(from = start1, to = end1, time_by = list("days" = x), time_type = "duration") testthat::expect_equal(time_seq_v(start1, end1, time_by = list("days" = seq(0.5, 20, 0.5)), time_type = "duration"), do.call(c, lapply(seq(0.5, 20, 0.5), foo1))) foo2 <- function(x) time_seq(from = start1, to = end1, time_by = list("days" = x), time_type = "period") testthat::expect_equal(time_seq_v(start1, end1, time_by = list("days" = seq(1, 20, 1)), time_type = "period"), do.call(c, lapply(seq(1, 20, 1), foo2))) }) testthat::test_that("ftseq compared to time_seq", { start1 <- lubridate::ymd_hms("2023-03-16 11:43:48", tz = "Europe/London") end1 <- start1 + lubridate::ddays(37) end2 <- start1 + lubridate::days(37) # testthat::expect_equal(time_seq(start1, end1, time_by = "2 days", time_type = "period"), # ftseq(start1, end1, units = "days", num = 2, time_type = "period")) # testthat::expect_equal(time_seq(start1, end1, time_by = "2 days", time_type = "duration"), # ftseq(start1, end1, units = "days", num = 2, time_type = "duration")) # # Negative sign for time_seq() but not ftseq() # testthat::expect_equal(time_seq(end1, start1, time_by = "2 days", time_type = "duration"), # ftseq(end1, start1, units = "days", num = -2, time_type = "duration")) # # testthat::expect_equal(time_seq(start1, end1, time_by = "2 days"), # ftseq(start1, end1, units = "days", num = 2)) # testthat::expect_equal(time_seq(start1, end1, time_by = list("hours" = pi)), # ftseq(start1, end1, units = "hours", num = pi)) # testthat::expect_equal(time_seq(start1, end1, time_by = list("hours" = pi), tz = "America/New_York"), # lubridate::with_tz(ftseq(start1, end1, units = "hours", num = pi), # "America/New_York")) # testthat::expect_equal(time_seq(start1, end1, time_by = list("hours" = pi), tz = "America/New_York", # time_floor = TRUE), # lubridate::with_tz(ftseq(start1, end1, units = "hours", num = pi, # time_floor = TRUE), "America/New_York")) # testthat::expect_equal(time_seq(13.5, 194.75, time_by = list("numeric" = 7), # time_floor = FALSE), # ftseq(13.5, 194.75, units = "numeric", num = 7, # time_floor = FALSE)) # testthat::expect_equal(time_seq(13.5, 194.75, time_by = 7, # time_floor = FALSE), # ftseq(13.5, 194.75, units = "numeric", num = 7, # time_floor = FALSE)) # testthat::expect_equal(time_seq(13.5, 194.75, time_by = 7, # time_floor = TRUE), # ftseq(13.5, 194.75, units = "numeric", num = 7, # time_floor = TRUE)) testthat::expect_equal(time_seq(100, 5, time_by = 5), seq(100, 5, by = -5)) testthat::expect_equal(time_seq(100, 5, time_by = -5), seq(100, 5, by = -5)) testthat::expect_equal(time_seq(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "duration"), lubridate::POSIXct(0)) # testthat::expect_equal(ftseq(lubridate::Date(0), lubridate::Date(0), units = "days", time_type = "duration"), # lubridate::POSIXct(0)) testthat::expect_equal(time_seq(lubridate::Date(0), lubridate::Date(0), time_by = "days", time_type = "period"), lubridate::Date(0)) # testthat::expect_equal(ftseq(lubridate::Date(0), lubridate::Date(0), units = "days", time_type = "period"), # lubridate::Date(0)) }) testthat::test_that("dates, datetimes and numeric increments", { start1 <- lubridate::ymd_hms("2023-03-16 11:43:48", tz = "Europe/London") end1 <- start1 + lubridate::ddays(10) start2 <- lubridate::as_date(start1) end2 <- lubridate::as_date(end1) testthat::expect_equal(time_seq_v(start2, end2, time_by = "3 days"), time_seq_v(start2, end2, time_by = 3)) testthat::expect_equal(time_seq_v(start1, end1, time_by = "300 seconds"), time_seq_v(start1, end1, time_by = 300)) testthat::expect_equal(time_seq_v(start1, end2, time_by = "338.5 seconds"), time_seq_v(start1, end2, time_by = 338.5)) testthat::expect_equal(time_seq_v(start2, end1, time_by = "338.5 seconds"), time_seq_v(start2, end1, time_by = 338.5)) })