R Under development (unstable) (2024-10-21 r87258 ucrt) -- "Unsuffered Consequences"
Copyright (C) 2024 The R Foundation for Statistical Computing
Platform: x86_64-w64-mingw32/x64

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> ## The setup seems to be quite messy, but it is so to enable use of this in
> ## several ways as shown below.
> 
> ## 1. "R CMD check" should be the most authoritative way to run the RUnit
> ## tests for a developer. RUnit tests are issued during R CMD check of the
> ## package due to example section of .runRUnitTests() function. If any test
> ## fails or if there are any R errors during RUnit testing, R CMD check fails.
> ## These are variable values specific for this way:
> ##  - .path DEVEL/PATH/PKG.Rcheck/PKG/unitTests
> ##  - .way  function
> 
> ## 2. Running ".runRUnitTests()" from within R after library(PKG) is handy for
> ## package useRs, since it enables useRs to be sure that all tests pass for
> ## their installation. This is just a convenient wrapper function to run
> ## the RUnit testing suite. These are variable values specific for this
> ## way:
> ##  - .path INSTALL/PATH/PKG/unitTests
> ##  - .way  function
> 
> ## 3. The "Shell" is another possibility, mainly for a developer in order to
> ## skip possibly lengthy R CMD check and perform just RUnit testing with an
> ## installed version of a pcakage. These are variable values specific for
> ## this way:
> ##  - .path DEVEL/PATH/PKG/inst/unitTests
> ##  - .way  shell
> ##
> ## Rscript runRUnitTests.R
> ## R CMD BATCH runRUnitTests.R
> ## make
> ## make all
> 
> PKG  <- "gdata"
> 
> if(require("RUnit", quietly=TRUE)) {
+   path <- normalizePath("unitTests")
+ 
+   cat("\nRunning unit tests\n")
+   print(list(pkg=PKG, getwd=getwd(), pathToUnitTests=path))
+ 
+   library(package=PKG, character.only=TRUE)
+ 
+   testFileRegexp <- "^runit.+\\.[rR]$"
+ 
+   ## Debugging echo
+   cat("\nRunning RUnit tests\n")
+   print(list(pkg=PKG, getwd=getwd(), pathToRUnitTests=path))
+ 
+   ## Define tests
+   testSuite <- defineTestSuite(name=paste(PKG, "RUnit testing"), dirs=path,
+                                testFileRegexp=testFileRegexp)
+ 
+   ## Run
+   tests <- runTestSuite(testSuite)
+ 
+   if(file.access(path, 02) != 0) {
+     ## Cannot write to path -> use writable one
+     tdir <- tempfile(paste(PKG, "RUnitTests", sep="_"))
+     dir.create(tdir)
+     pathReport <- file.path(tdir, "report")
+   } else {
+     pathReport <- file.path(path, "report")
+   }
+ 
+   ## Print results:
+   printTextProtocol(tests)
+   printTextProtocol(tests, fileName=paste0(pathReport, ".txt"))
+ 
+   ## Print HTML Version of results:
+   printHTMLProtocol(tests, fileName=paste0(pathReport, ".html"))
+ 
+   cat("\nRUnit reports also written to\n",
+       pathReport, ".(txt|html)\n\n", sep="")
+ 
+   ## Return stop() to cause R CMD check stop in case of
+   ##  - failures i.e. FALSE to RUnit tests or
+   ##  - errors i.e. R errors
+   tmp <- getErrors(tests)
+   if(tmp$nFail > 0 || tmp$nErr > 0) {
+     stop("\n\nRUnit testing failed:\n",
+          " - #test failures: ", tmp$nFail, "\n",
+          " - #R errors: ",  tmp$nErr, "\n\n")
+   }
+ } else {
+   cat("R package 'RUnit' cannot be loaded - no unit tests run\n",
+       "for package", PKG, "\n")
+ }

Running unit tests
$pkg
[1] "gdata"

$getwd
[1] "d:/RCompile/CRANincoming/R-devel/gdata.Rcheck/tests"

$pathToUnitTests
[1] "D:\\RCompile\\CRANincoming\\R-devel\\gdata.Rcheck\\tests\\unitTests"


Attaching package: 'gdata'

The following object is masked from 'package:stats':

    nobs

The following object is masked from 'package:utils':

    object.size

The following object is masked from 'package:base':

    startsWith


Running RUnit tests
$pkg
[1] "gdata"

$getwd
[1] "d:/RCompile/CRANincoming/R-devel/gdata.Rcheck/tests"

$pathToRUnitTests
[1] "D:\\RCompile\\CRANincoming\\R-devel\\gdata.Rcheck\\tests\\unitTests"



Executing test function test.bindData  ... Error in bindData(x = 1:10, y = 1:10) : 'x' must be a data frame
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
Error in bindData(x = matrix(1:10), y = matrix(1:10)) : 
  'x' must be a data frame
 done successfully.



Executing test function test.cbindX  ...  done successfully.



Executing test function test.drop.levels  ...  done successfully.



Executing test function test.getDay  ... Error in getDay.default(x = num) : 
  'getDay' can only be used on objects of a date/time class
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
3: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
4: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
5: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
6: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
Error in getDay.default(x = cha) : 
  'getDay' can only be used on objects of a date/time class
Error in getDay.default(x = fac) : 
  'getDay' can only be used on objects of a date/time class
 done successfully.



Executing test function test.getHour  ... Error in getHour.default(x = num) : 
  'getHour' can only be used on objects of a date/time class
Error in getHour.default(x = cha) : 
  'getHour' can only be used on objects of a date/time class
Error in getHour.default(x = fac) : 
  'getHour' can only be used on objects of a date/time class
 done successfully.



Executing test function test.getMin  ... Error in getMin.default(x = num) : 
  'getMin' can only be used on objects of a date/time class
Error in getMin.default(x = cha) : 
  'getMin' can only be used on objects of a date/time class
Error in getMin.default(x = fac) : 
  'getMin' can only be used on objects of a date/time class
 done successfully.



Executing test function test.getMonth  ... Error in getMonth.default(x = num) : 
  'getMonth' can only be used on objects of a date/time class
Error in getMonth.default(x = cha) : 
  'getMonth' can only be used on objects of a date/time class
Error in getMonth.default(x = fac) : 
  'getMonth' can only be used on objects of a date/time class
 done successfully.



Executing test function test.getSec  ... Error in getSec.default(x = num) : 
  'getSec' can only be used on objects of a date/time class
Error in getSec.default(x = cha) : 
  'getSec' can only be used on objects of a date/time class
Error in getSec.default(x = fac) : 
  'getSec' can only be used on objects of a date/time class
 done successfully.



Executing test function test.getYear  ... Error in getYear.default(x = num) : 
  'getYear' can only be used on objects of a date/time class
Error in getYear.default(x = cha) : 
  'getYear' can only be used on objects of a date/time class
Error in getYear.default(x = fac) : 
  'getYear' can only be used on objects of a date/time class
 done successfully.



Executing test function test.cLevelsMap  ... Error in c.listLevelsMap(x, sort = sort, recursive = TRUE) : 
  can not combine integer "levelsMaps"
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
 done successfully.



Executing test function test.checkLevelsMap  ... Error in gdata:::.checkLevelsMap(x = "A", method = "raw") : 
  '"A"' must be  a named list
Error in gdata:::.checkLevelsMap(x = list("A"), method = "raw") : 
  'list("A")' must be  a named list
Error in gdata:::.checkLevelsMap(x = fMapInt, method = "class") : 
  'fMapInt' must be a "levelsMap"
Error in gdata:::.checkListLevelsMap(x = map, method = "class") : 
  'map' must be a "listLevelsMap"
Error in gdata:::.checkListLevelsMap(x = map1, method = "class") : 
  'map1' must be also a list of "levelsMap"
 done successfully.



Executing test function test.mapLevels  ... Error in mapLevels.default(1:3) : 
  mapLevels can only be used on "factor" and "character" atomic 'x'
Error in mapLevels.default(1.5) : 
  mapLevels can only be used on "factor" and "character" atomic 'x'
Error in mapLevels.list(l, combine = TRUE) : 
  can not combine integer "levelsMaps"
Error in mapLevels.default(X[[i]], ...) : 
  mapLevels can only be used on "factor" and "character" atomic 'x'
Error in mapLevels.default(X[[i]], ...) : 
  mapLevels can only be used on "factor" and "character" atomic 'x'
 done successfully.



Executing test function test.mapLevels<-  ... Error in `mapLevels<-.default`(1.1, value = 2) : 
  'x' must be either: "integer", "character", "factor"
Error in `mapLevels<-.default`(complex(1.1), value = 2) : 
  'x' must be either: "integer", "character", "factor"
Error in `mapLevels<-.default`(as.character(f), value = fMapInt) : 
  can not apply integer "levelsMap" to "character"
Error in func() : object 'chaMapCha' not found
Error in `mapLevels<-.default`(as.character(f), value = fMapFuzz) : 
  all components of 'value' must be of the same class
Error in `mapLevels<-.default`(as.integer(f), value = fMapFuzz) : 
  all components of 'value' must be of the same class
 done successfully.



Executing test function test.uniqueLevelsMap  ...  done successfully.



Executing test function test.nPairs  ... Error in nPairs(x = x) : 'x' must be a data.frame or a matrix
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
Error in nPairs(x = table(x)) : 'x' must be a data.frame or a matrix
 done successfully.



Executing test function test.reorder.factor  ...  done successfully.



Executing test function test.trim  ...  done successfully.



Executing test function test.trimSum  ... Error in trimSum(matrix(1:10)) : 'x' must be a vector - for now
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
3: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
4: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
5: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
6: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
Error in trimSum(data.frame(1:10)) : 'x' must be a vector - for now
Error in trimSum(list(1:10)) : 'x' must be a vector - for now
Error in trimSum(letters) : 'x' must be numeric
Error in trimSum(x = 1:10, n = 11) : 
  'n' must be smaller than the length of x
Error in trimSum(x = 1, n = 1) : 'n' must be smaller than the length of x
 done successfully.



Executing test function test.NAToUnknown  ... Error in NAToUnknown.default(xInt, unknown = unkC) : 
  'unknown' must be a single value
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
3: new level is introduced: notAvail 
Error in NAToUnknown.default(xInt, unknown = unkL) : 
  'unknown' must be a single value
Error in NAToUnknown.default(xCha, unknown = chaUnk1) : 
  'x' already has value "-"
Error in NAToUnknown.factor(xFac, unknown = facLev) : 
  'x' already has level "A"
Error in NAToUnknown.default(x = dots[[1L]][[3L]], unknown = dots[[2L]][[3L]],  : 
  'unknown' must be a single value
In addition: There were 11 warnings (use warnings() to see them)
Error in NAToUnknown.default(x = dots[[1L]][[3L]], unknown = dots[[2L]][[3L]],  : 
  'unknown' must be a single value
Error in .unknownList(x = x, unknown = unknown) : 
  can not propely recycle named 'unknown'
In addition: There were 16 warnings (use warnings() to see them)
Error in .unknownList(x = x, unknown = unknown) : 
  can not propely recycle named 'unknown'
In addition: Warning messages:
1: 'unknown' should be "integer" for "integer" 'x' - will try to coerce 
2: 'unknown' should be "numeric" for "numeric" 'x' - will try to coerce 
3: new level is introduced: notAvail 
Error in .unknownList(x = x, unknown = unknown) : 
  can not propely recycle named 'unknown'
In addition: Warning messages:
1: 'unknown' should be "integer" for "integer" 'x' - will try to coerce 
2: 'unknown' should be "numeric" for "numeric" 'x' - will try to coerce 
3: new level is introduced: notAvail 
Error in .unknownList(x = x, unknown = unknown) : 
  name(s) '' not in names of 'x'
In addition: There were 16 warnings (use warnings() to see them)
 done successfully.



Executing test function test.isUnknown  ... Error in .unknownList(x = x, unknown = unknown) : 
  name(s) '' not in names of 'x'
In addition: Warning message:
'unknown' should be "matrix" for "matrix" 'x' - will try to coerce 
 done successfully.



Executing test function test.unknownToNA  ... Error in .unknownList(x = x, unknown = unknown) : 
  can not propely recycle named 'unknown'
Error in .unknownList(x = x, unknown = unknown) : 
  can not propely recycle named 'unknown'
Error in .unknownList(x = x, unknown = unknown) : 
  can not propely recycle named 'unknown'
Error in .unknownList(x = x, unknown = unknown) : 
  name(s) '' not in names of 'x'
 done successfully.



Executing test function test.wideByFactor  ... Error in wideByFactor(x = 1:10) : 'x' must be a data frame
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
Error in wideByFactor(x = matrix(1:10)) : 'x' must be a data frame
Error in wideByFactor(x = tmp, factor = c("f1", "f2")) : 
  'factor' can be only of length one
Error in wideByFactor(x = tmp, factor = "c1") : 
  column defined in 'factor' must be a factor
 done successfully.



Executing test function test.write.fwf  ... Error in write.fwf(1:10) : 'x' must be a data.frame or matrix
In addition: Warning messages:
1: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: Marsaglia-Multicarry has poor statistical properties
2: In RNGkind(kind = testSuite$rngKind, normal.kind = testSuite$rngNormalKind) :
  RNGkind: severe deviations from normality for Kinderman-Ramage + Marsaglia-Multicarry
Error in write.fwf(list(1:10)) : 'x' must be a data.frame or matrix
Error in write.fwf(data.frame(1:10, letters[1:10]), na = c("", " ")) : 
  only single value can be defined for 'na'
num1 num2
 1    
 2 1.0
 3 1.5
 4 2.0
 5 2.5
 6 3.0
 7 3.5
 8 4.0
 9 4.5
10 5.0
   5.5
num1 num2
 1    
 2 1.0
 3 1.5
 4 2.0
 5 2.5
 6 3.0
 7 3.5
 8 4.0
 9 4.5
10 5.0
   5.5
a b c d
123 3.141593 1e+08 1e+222
int1
1
2
3
4
 
4
5
6
7
8
9
int1
   1
   2
   3
   4
1234
   4
   5
   6
   7
   8
   9
row num1 num2
1   1    
2   2 1.0
3   3 1.5
4   4 2.0
5   5 2.5
6   6 3.0
7   7 3.5
8   8 4.0
9   9 4.5
10 10 5.0
11    5.5
row num1 num2
1   1    
2   2 1.0
3   3 1.5
4   4 2.0
5   5 2.5
6   6 3.0
7   7 3.5
8   8 4.0
9   9 4.5
10 10 5.0
11    5.5
num1 num2
 1    
 2 1.0
 3 1.5
 4 2.0
 5 2.5
 6 3.0
 7 3.5
 8 4.0
 9 4.5
10 5.0
   5.5
num1 num2
 1    
 2 1.0
 3 1.5
 4 2.0
 5 2.5
 6 3.0
 7 3.5
 8 4.0
 9 4.5
10 5.0
   5.5
"num1" "num2"
" 1" "   "
" 2" "1.0"
" 3" "1.5"
" 4" "2.0"
" 5" "2.5"
" 6" "3.0"
" 7" "3.5"
" 8" "4.0"
" 9" "4.5"
"10" "5.0"
"  " "5.5"
"num1" "num2"
" 1" "   "
" 2" "1.0"
" 3" "1.5"
" 4" "2.0"
" 5" "2.5"
" 6" "3.0"
" 7" "3.5"
" 8" "4.0"
" 9" "4.5"
"10" "5.0"
"  " "5.5"
"num1" "num2"
" 1" "   "
" 2" "1.0"
" 3" "1.5"
" 4" "2.0"
" 5" "2.5"
" 6" "3.0"
" 7" "3.5"
" 8" "4.0"
" 9" "4.5"
"10" "5.0"
"  " "5.5"
"num1" "num2"
" 1" "   "
" 2" "1.0"
" 3" "1.5"
" 4" "2.0"
" 5" "2.5"
" 6" "3.0"
" 7" "3.5"
" 8" "4.0"
" 9" "4.5"
"10" "5.0"
"  " "5.5"
num1
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
          
num1
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
          
Error in write.fwf(testData[, c("num1", "num2")], width = 2) : 
  'width' (2) was too small for columns: num2
 'width' should be at least (3)
In addition: Warning message:
In write.fwf(testData[, c("num1", "num2")], width = 2) : recycling 'width'
Error in write.fwf(testData[, c("num1", "num2")], width = c(2, 1)) : 
  'width' (1) was too small for columns: num2
 'width' should be at least (3)

DONE.

 done successfully.

RUNIT TEST PROTOCOL -- Tue Oct 22 06:05:05 2024 
*********************************************** 
Number of test functions: 23 
Number of errors: 0 
Number of failures: 0 

 
1 Test Suite : 
gdata RUnit testing - 23 test functions, 0 errors, 0 failures



Details 
*************************** 
Test Suite: gdata RUnit testing 
Test function regexp: ^test.+ 
Test file regexp: ^runit.+\.[rR]$ 
Involved directory: 
D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests 
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.bindData.R 
test.bindData: (11 checks) ... OK (0.03 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.cbindX.R 
test.cbindX: (5 checks) ... OK (0.02 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.drop.levels.R 
test.drop.levels: (3 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.getDateTimeParts.R 
test.getDay: (6 checks) ... OK (0 seconds)
test.getHour: (3 checks) ... OK (0 seconds)
test.getMin: (3 checks) ... OK (0 seconds)
test.getMonth: (6 checks) ... OK (0 seconds)
test.getSec: (3 checks) ... OK (0 seconds)
test.getYear: (6 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.mapLevels.R 
test.cLevelsMap: (8 checks) ... OK (0 seconds)
test.checkLevelsMap: (5 checks) ... OK (0 seconds)
test.mapLevels: (26 checks) ... OK (0.02 seconds)
test.mapLevels<-: (19 checks) ... OK (0.01 seconds)
test.uniqueLevelsMap: (1 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.nPairs.R 
test.nPairs: (8 checks) ... OK (0.02 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.reorder.factor.R 
test.reorder.factor: (5 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.trim.R 
test.trim: (5 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.trimSum.R 
test.trimSum: (10 checks) ... OK (0.01 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.unknown.R 
test.NAToUnknown: (44 checks) ... OK (0.03 seconds)
test.isUnknown: (38 checks) ... OK (0.02 seconds)
test.unknownToNA: (40 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.wideByFactor.R 
test.wideByFactor: (10 checks) ... OK (0 seconds)
--------------------------- 
Test file: D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/runit.write.fwf.R 
test.write.fwf: (22 checks) ... OK (0.06 seconds)

RUnit reports also written to
D:\RCompile\CRANincoming\R-devel\gdata.Rcheck\tests\unitTests/report.(txt|html)

> 
> proc.time()
   user  system elapsed 
   0.48    0.21    0.67